background image

QUALITY

Fisher detectors are renowned for their quality. 

In the Fisher tradition, each detector is hand crafted with pride 

PERFORMANCE

Our detectors are durable, dependable, and search deeper.

REPUTATION

Fisher produced the first patented metal detector in 1931. For 
over 70 years, the Fisher logo has been a mark of excellence.

5-YEAR LIMITED WARRANTY

Fisher believes in the products we produce and backs this belief with 

a 5-Year Limited Warranty. Warranty may vary outside the United 

States. See your dealer for details

SERVICE

Fisher is committed to providing you, our valued customer, with 

superior service. Each and every instrument is rigidly tested 

& carefully inspected during assembly and before shipment. 

Should you have any questions or problems, contact:

FISHER RESEARCH LABORATORY

200 West Willmott Road.,

Los Banos, California 93635

Tel 209.826.3292   Fax 209.826.0416

www.fisherlab.com   email: [email protected]

FRL#8730024-C

ID EDgE

Target I.D. Metal Detector

F I S H E R     R E S E A R C H     L A B O R A T O R Y

Operating Manual

IDedgeManual-8730024 .indd   1

6/13/06   3:08:57 PM

Summary of Contents for ID EDGE











Reviews: