Nova Mercury Woodlathe Specifications
Toolrest:
Weight:
59lbs (24.58Kgs) Packaged.
Length: 6" (150mm)
Overall dimensions:
Shaft Diameter: 5/8" (15mm)
Length
: 20.5" approx. (525mm)
Motor:
Includes projection of outboard spindle.
1/2 HP (Average Output) DC
(Permanent Magnet Type) Variable
Speed Drive.
Height:
11.5" approx. (285mm)
Top of headstock from bench.
Speeds:
Swing over bed
: 8" (200mm)
Low Speed Pulley: 140rpm - 1750rpm
Distance Between Centers:
11" (280mm)*
(Left position pulley looking at spindle from
operator side)
(*Can be increased with 12” (300mm) extension beds)
Swing Outboard:
14" (355mm)*
Middle Speed Pulley: 320rpm - 3670rpm
(*Normal operational capacity is around 10” /250mm)
High Speed Pulley: 470rpm - 5350rpm
Headstock:
Standard Equipment:
Spindle Thread: 1" 8TPI RH.
Live (Revolving Center) 2MT
Headstock Bore: No.2 Morse Taper (2MT)
Spur Center 2MT
Outboard Spindle Thread: 1" 8TPI LH
2 1/2" (60mm) Faceplate
Through Bore: 3/8" (10mm)
6" (150mm) Toolrest
Traverse Hole through Spindle: 3/8"
(10mm)
Optional Accessories:
Mercury Bed Extension
(Accepts up to 3/8" steel rod to act as
spindle lock)
Mercury Outrigger
(work weight limits. 4-5lbs)(1.8-2.3kgs)
Tailstock:
Nova Chuck System
Tailstock Bore: 2MT
Nova Compac Chuck
Quill Travel: 2.5" (63mm)
Hole Through Tailstock: 3/8" (10mm)
8 9
