background image

 

 

1

OWNER’S MANUAL 

                                                         

GMRS/FRS RADIO 21-1904 

                                                                        June 11, 2003

 

 

INTRODUCTION 

Your GMRS/FRS radio is a portable, easy-to-use, two-way radio that you can carry almost 

anywhere. Use it to contact family and friends at shopping malls, amusement parks, sports events, 

or at the beach to, or for making vital communications in a neighborhood watch. 

 

Your radio has 22 GMRS/FRS channels, 38 CTCSS codes and 10 NOAA weather channels. If 

someone else is using the same channel as you selected but you do not want to hear that person, 

select another channel or use the CTCSS feature. You can talk with a person who has a 

GMRS/FRS radio if both radios are tuned to the same channel and CTCSS code. 

 

Your radio has auto-squelch, which means you will not hear anything on a channel unless 

someone is transmitting nearby the same channel. You can turn off auto-squelch to hear weaker 

and more distant transmissions. 

 

Also, if the radio is idle for 30, 60 or 90 minutes, it will automatically shut off. It can be wakened 

up when you press any key. 

 

You can connect an optional speaker/microphone and earphone, charger (not supplied) to the radio.   

In addition, the belt clip on the back of the radio makes you take it very conveniently, you can 

carry it almost anywhere. 

 

FCC INFORMATION

 

Caution:

 This two-way radio operates on GMRS (General Mobile Radio Service) frequencies 

which require an FCC (Federal Communications Commission) license.    A user must be licensed 

prior to operating on channels 1 through 7 or 15 through 22, which comprise the GMRS channels 

of this radio.    Serious penalties could result for unlicensed use of GMRS channels, in violation of 

FCC rules, as stipulated in the Communications Act’s Sections 501 and 502. 

 

For licensing information and application forms, please call the FCC Hotline at 800-418-FORM.   

Request form #159 and form #605.  Questions regarding the license application should be 

directed to the FCC at 888-CALL-FCC.  Additional information is available on the FCC’s 

website at www.fcc.gov.   

 

Do not open your radio to make any internal adjustments. Your radio is set up to transmit a 

regulated signal on one of 22 assigned frequencies. It is against the law to alter or adjust the 

settings inside the radio to exceed those limitations. Any adjustments for your radio can only be 

made by a qualified technician via using the proper test equipment. 

 

Summary of Contents for 21-01904















Reviews: