Maintenance SD-long
Care instructions
Lift the pump handle out of the bottle.
2. Rinse the pump under running hot water. Remove
coagulated detergent residues.
3. Fill a bowl with warm water.
4. Place the pipe in the water and pump hot water
through the pipe and the dispenser.
5. Continue to pump hot water through the pump
dispenser until the water flows freely through the
spout so that coagulated detergent does not block the
water flow.
We recommend that you do this cleaning regularly. A
dispenser that is not cleaned as described is not
covered by the warranty in the event of corrosion or
stoppage. Always add detergent from above, without
unscrewing the bottle underneath. To avoid vacuum,
use a funnel when filling and do not fill with
detergent all the way to the top.
If the detergent is viscous, mix it with 50% water.
Avoid the detergent ZALO as it is viscous and can
cause blockages.
2
FDV Revision 20150424
www.intra-teka.com
