13.2.2 Smartlink Settings
Note
: Select Smartlink option to add device for either first time or if the device is in the factory
reset mode.
Follow steps below to add the device using Smartlink option for either iOS or Android:
1. Power on the smart video doorbell and wait for beep sound.
2.
Open and login into the “Yoosee” application to do the Wi-Fi settings.
Notes:
a) Ensure the Wi-Fi network that you are going to set can connect to the smartphone or
iPad/tablet normally.
b) Make sure to add doorbell using Smartlink within 5 minutes or till doorbell produces
beep sound otherwise restart (power cycle) the doorbell again.
3. When doorbell starts and produces beep sound then click “+” button to add the
new device and follow the steps as per below screen shots:
①
Open App, click “+” button.
②
Click on Add new device
Rev 1.0
19 | P a g e
DP1500 User Manual
