10. RFID Card Settings
10.1 Setting Management Card
•
Number of RF Cards:
Add card x 1, Delete card x 1, User cards x 5.
• DIP switch 3 is in the “OFF” position by default.
• First, put switch 3 to ON position after power OFF, then power ON again.
• Now it enters into setting state of management card, at this time the Red and Blue
lights flashes alternately.
• Swipe Add card, buzzer rings one time and Blue light turns OFF.
• Swipe Delete card, buzzer rings one time and Red light turns OFF.
• Management card settings are completed. Then power OFF the device, put switch 3
back to “OFF” position then connects smart doorbell to power adapter again.
10.2 Add User Card
To add single target user card: Swipe the Add card one time, Blue light becomes ON, swipe one
target user card, the buzzer will ring for one time after successful addition. Once again swipe
the Add card to exit the adding state.
To add more than one target user cards at a time, swipe the Add card one time, swipe target
user cards one by one continuously. Once again swipe the Add card to exit the adding state.
10.3 Delete User Card
Swipe the Delete card one time, Red light becomes ON, swipe one target user card to be
deleted, buzzer will ring one time after successful deletion. Once again swipe the Delete card
to exit the delete state.
To delete all user cards, first swipe Delete card one time then swipe Add card and finally swipe
Delete card, this deletes all user cards.
Rev 1.0
14 | P a g e
DP1500 User Manual
