background image

For detailed information about the best slope 
gradient, please get in touch with us via email: 

[email protected]

Although 

SOLAR FLAT-5XL ceramic roof

 tiles are 

guaranteed to give high performance and produce 
the specified energy output, and are highly effective 
in the shade, their installation in areas where the tiles 
may be shaded at any time is not recommended. 
Avoid installing the 

SOLAR FLAT-5XL ceramic 

roof tiles

 in places which are frequently shaded. If 

SOLAR FLAT-5XL ceramic roof tile

 is affected 

by total or partial shade, its performance will be 
impeded, causing a lower power output. 

Do not use 

SOLAR FLAT-5XL ceramic roof tiles

 

near to equipment or in places where they could 
generate flammable gases.

6.3 Climatic conditions

SOLAR FLAT-5XL ceramic roof tiles

 are 

guaranteed to function with a linear output of up 
to 80% for 25 years in the following environmental 
conditions:

• Operating temperature: -40°C to 85°C.

The system installer must make sure that the installation 
methods used comply with the aforementioned 
requirements and any other code or regulations in 
force.

We can advise you on the design and 

specification of a SOLAR FLAT-5XL ceramic 

roof tile installation to meet your needs.

Contact us! [email protected]

6.4 Compatibility

6.4.1 Ceramic tile – roof covering

The 

SOLAR FLAT-5XL ceramic roof tile

 is entirely 

compatible with the FLAT-5XL ceramic tile 

https://tejasborja.com/en/roof-tile/flat-5xl/ 

The FLAT-5XL ceramic tile, made from high-quality 
stoneware clay, has a water absorption coefficient of 
less than 3%, the lowest on the market. This makes it 
suitable for installation in any climate. Its dimensions 
means it offers all the installation benefits of large 
format tiles. 

15

Summary of Contents for Roof&Plug SOLAR FLAT-5XL





































Reviews: