Smart active foam generator
i
foam
26-32
maintenance and care
If the foam or rinsing water does not spray out uniformly from the nozzles, check that they are not blocked
with dirt.
Keep the machine in good condition, avoid knocking it or overloading it.
Keep connections clean to avoid clogged pipes that could cause serious damage to the main components
of the machine.
Keep the connector fittings clean, dry and in good condition. Lubricate the connector fittings at least once a
month.
Remove the Bag in Box from the equipment for transport and if it is not going to be used.
Keep the grey bag-in-box connector clear of salts and debris.
Keep the machine as clean as possible. Keep the equipment in a place protected from the weather and at a
temperature between 0 and 40
o
C.
Once you have finished using your IFOAM, it is important to clean the equipments liquid circuit
by rinsing. Storing the equipment with chemicals in the machine’s internal ducts can reduce the
lifetime of the components.
