10 TEGAM WAY • GENEVA, OHIO 44041 • 440
-
466
-
6100 • FAX 440
-
466
-
6110
•
5-8
MAINTENANCE
5.7 Overhaul Instructions
The R1L-B is an all solid-state unit and requires no periodic
overhaul, other than routine cleaning, inspection of cables
per section 5, and calibration per section 5.4.
However, some disassembly is required to remove and
install the batteries. This level of disassembly is detailed in
section 5.5, and battery cells should be removed at the
negative end first.
Tools and test equipment used for disassembly, calibration,
and troubleshooting of the R1L-B are listed in section 5.3.
Troubleshooting suggestions are given in section 5.5.
The only component expected to require replacement is the
battery. The battery designation is listed on the
Replacement Parts List, with battery cell removal and
installation instructions given in section 2.2.
Figure 2: Parts Layout
