TEFAL VU9050, Manual, Page: 5 / 22

Button B, selection of REDUCTION or VARIATION mode:
VARIATION
:
REDUCTION
:
Random cyclical speeds (80-second duration)
Random cyclical speeds (80-second duration)
+ progressively slower speeds every 30 minutes
Pre-selection of speed
Pre-selection of speed
Pre-selection of speed
Speed
Speed variation
Speed variation
Speed variation
Speed
variation
Speed
variation
Speed
variation
Speed
Speed
0
0 30 minutes
30 minutes 60 minutes 0
Pre-selection of speed
Pre-selection of speed
Pre-selection of speed
3
Pre-select the starting speed according to your requirements (see table above), then
select the REDUCTION or VARIATION mode (according to the instructions below):
- If you press button B once, the appliance goes into VARIATION mode and the
'VARIATION' light comes on.
- If you press button B a second time, the appliance goes into REDUCTION mode and
the 'REDUCTION' light comes on.
- To switch this function off, press button B a third time.
• Button A, speed selection:
- If you press button A once, the appliance is set to speed 1 and the light comes on.
- If you press button A a second time, the appliance is set to speed 2 and the light
comes on.
- If you press button A a third time, the appliance is set to speed 3 and the light comes on.
- If you press button A again, the appliance goes back to speed 1 and the light comes on.
• Button E, immediate stop/start button for the appliance.
IMPORTANT: You are advised to unplug the appliance when not in use.
EN
VU9050_1800134191-01_ARTIK-CRYSTAL_1800134191/01 12/09/14 14:02 Page3