TROUBLESHOOTING
27
ENVIRONMENTAL PROTECTION FIRST !
i
Your appliance contains valuable materials which can be recovered
or recycled.
‹
Leave it at a local civic waste collection point.
Problems
Possible causes
Solutions
There is no steam.
The appliance has not
been turned on.
Check that the appliance has
been plugged in correctly. Next
press the On/Off pedal, the power
indicator light located at the front
of the appliance will come on.
The hose has been
obstructed.
Check that the hose is not bent or
twisted.
There is no water left in
the water tank.
Switch off the device and fill the
water tank.
The steam is not ready
yet.
The appliance will produce steam
about 45 seconds after it has
been switched on.
The steam flow is
low.
Your steamer has a
build-up of scale
because it has not been
rinsed out regularly.
See descaling process (Cleaning
paragraph).
The hose has been
obstructed.
Check that the hose is not bent or
twisted.
There is no water left in
the water tank.
Switch off the appliance and fill
the water tank.
Water runs
through the holes
of the steam head.
There is condensation
in the hose.
Never use a steamer in the
horizontal position. Hold the hose
vertically outstretched and wait
for the condensed water to return
to the steamer.
The steamer takes
a long time to
heat and/or ejects
white particles.
Your steamer has a
build-up of scale
because it has not been
descaled
regularly.
See descaling process
(Cleaning paragraph).
1800141115 IT6540 X0.qxp_110x154 13/10/2016 13:59 Page27
