TEFAL IH7228, Manual

Page: 25 / 28

23
EN SAFEGUARDS
Malfunction description Causes Solutions
H
The temperature of the
ceramic plate exceeds 50
°
C
while being on standby mode.
This message is to inform
users that the panel is hot.
Just wait until the ceramic
panel temperature drops
down or take protective
measures to prevent from
burns if continue using.
E2
Power tube or sensor is open
circuit / short circuit.
Turn off the cooker.
E3
Voltage is over 265V-285V,
the induction cooker will
turn itself off.
Operation resumes after the
voltage returns to normal.
E4
Voltage is under 150V-170V,
the induction cooker will
turn itself off.
Operation resumes after the
voltage returns to normal.
E5 Sensor is open circuit. Turn off the cooker.
E6 Sensor is short circuit. Turn off the cooker.
Internal detection system
generate an alarm
If no pot or an unsuitable
pot is sensed on the ceramic
plate.
Place a suitable pot on the
ceramic plate.
Display remains unchanged
• Power tube is overheating,
the induction cooker will
turn itself off.
• Ceramic plate is
overheated and the
temperature sensor is
short circuit, the cooker
will turn itself off.
When the temperature
drops to designated level,
the induction cooker will
start reheating.
Cooker turns off
automatically
If it receives no operation
instruction for a period of
two hours to avoid any
incident at the absence of
the user.
Cooker not working
• Cooker not plugged in or
plug is damaged.
• Unsuitable pot is used.
• Check the appliance is
plugged in the socket, and
the plug is damaged.
• Check the pot size, place
a pot with diameter more
than 12cm.