TEFAL IH7228, Manual

Page: 26 / 28

24
CLEANING
Please unplug the power cord, wait till the ceramic plate is cooled down
and then follow the below directions to clean the cooker:
1. Ceramic plate: If the ceramic plate is very dirty, please clean the
ceramic plate using a damp soft cloth or a cleaning product which is
designed for use on ceramic hobs when necessary.
2. Cooker body and control panel: Use soft wet dishcloth to clean. In
case of any oil stains that are not easily removed, wipe away the stains
with neutral detergent and then clean with wet dishcloth.
3. Air entry/ air exit surface: remove any dust with a cotton bud.
Malfunction description Causes Solutions
Cooker suddenly stops
heating during use
• Room temperature is too
high.
• Safety protections is on.
• Check if the room
temperature is too high.
• Check if it is due to safety
protections. In this case,
wait for several minutes
and confirm.
Cooker turns off after
warning with continuous
and urgent beeps
Improper use of the pot or
unsuitable pot is used.
• Check if the pot is
induction compatible.
• Check if pot is placed in
the centre of the ceramic
plate.
• Check the pot size, place
a pot diameter more than
12cm.
Please note: If the power cord is damaged, do not use the appliance.
Have it replaced by a Tefal Approved Service Centre to avoid any danger.