TEFAL FRESH EXPRESS MAX User Manual Download Page 5

Page: 5 / 16

RECOMMENDATIONS FOR USE

The slow speed (left position) is intended for hard foods (e.g. parmesan, chocolate).
The slow speed is also recommended for soft or delicate foods (cucumber, cooked beetroot).
For all other foods you can use either the slow (left position) or the turbo speed.

Fitting the dicing accessory:

Always handle the dicing cone with care, the blades are extremely sharp.

• Place the dicing cone in the opening at the front of the holder

(D)

, the cone should be correctly

positioned all the way into the drive

(fig. 3)

• Then position the dicing ring

(E5b)

with the safety flap open, centring the safety hinge on the

cone holder tube

(fig. 9)

• Check that the dicing ring is correctly attached to the base of the cone holder.
• Close the safety hinge over the cone holder

(fig. 10)

• Use the dicing function by inserting the food through the feed tube. Push the food down gently

using the pusher

(C)

• Remove the dicing accessory by pulling the tab positioned at the top of the safety hinge

(fig. 11)

Tip: to unlock the safety hinge E5b more easily, move it upwards with one finger while simulta-

neously pulling the tab forward (fig.11).

F.A.Q.

Questions

Answers

• "The Cone is not properly held in

place in the holder, or does not
fully engage".

• "I can't remove the cone after

use".

• "The cone holder is quite hard to

fit and remove, is this normal?"

Simply make sure that the cone is slotted all the way
into the cone holder

(fig. 3)

. Press the on/off button

first before inserting food into the feed tube to ensure
the cone is correctly locked into place

(fig. 4)

To remove the cone after use, unlock it by turning it a
quarter turn to the right (fig. 6), then return it to the
upright position (Fig.7) which will release the cone

(fig. 8)

Yes when the appliance is new it can be quite stiff.
With use it will become easier to install and remove.

Centre in order to avoid any danger.

• Do not use cones or spare parts other than those provided by the approved after-sales centres.
• For all other foods you can use either slow speed (left position) or turbo speed.
•

Do not operate your appliance for more than 10 min in one go.

• This appliance is designed for domestic use. In the event of any commercial use, inappropriate

use or failure to comply with the instructions, the manufacturer accepts no responsibility and
the guarantee will not apply.

• Wash the accessories (cones, cone holder and pusher) with soapy water. Rinse and then dry ca-

refully.

• Choose the cone that corresponds to the required use.
• Fit the cone holder

(D)

on the motor unit

(A)

with the feed tube positioned slightly to the

right. Turn it a quarter turn to the left

(fig. 1 & 2)

until it locks in place with the feed tube in

a vertical position.

• Place the chosen cone into the opening at the front of the holder

(D)

, the cone should be

correctly positioned all the way into the drive

(fig. 3)

. Holding the rim of the cone, turn

the cone a quarter turn to the right to lock it into place.

• Plug in the appliance by turning the on/off button.
• Select the required speed (slow (left position) or turbo) and then press the on/off button

(fig.

to fix the cone in place.

• Cut the food to fit the feed tube. Remove the pusher, press the On/Off button first

before

in-

serting food into the feed tube. Insert food in the feed tube, hold down the On/Off button
continuously while gently pushing down the food using the food pusher

(C) (fig. 5)

TIP: There is no need to press down hard on the pusher to obtain good results; this type of use will

slow down the motor; simply ensure that the food remains in contact with the cone.

• To change or remove the cone, turn the holder

(D)

a quarter turn to the right

(fig. 6)

, then re-

turn it to the upright position

(fig. 7)

which will release the cone. Remove the cone

(fig. 8)