116
117
ES
ES
116
117
EN
EN
• To help you with cleaning, the bowl, lid
assembly and accessories are dishwasher safe,
with the exception of the common spindle
(D3 and D4)
and its locking ring
(D5)
(See Fig. 14)
.
• The accessories, the detachable common
spindle and the parts of the lid may become
slightly discoloured with certain ingredients
such as curry, carrot juice, etc; this does not
represent any danger for your health or for
the operation of your appliance. To avoid this,
clean these parts immediately after use.
• Before using your bowl set
(D)
, make sure that
the electrical contacts under the bowl are clean
and dry.
• To preserve the appearance and service life of
the lid of your appliance, hand wash it. Do not
use the abrasive side of the sponge to avoid
scratches.
• To not adversely affect the materials of the
bowl
(D),
ensure that you follow your dishwas-
her’s instructions for use, do not increase doses
of salt or dishwasher products.
Your appliance is equipped,
as standard, with electronic
motor protection to gua-
rantee its longevity. This
electronic security safe-
guards against incorrect
use; in this way, the motor
is properly protected.
In cases of extreme use which disregard the
recommendations in the instructions (see para-
graph ‘FIRST USE’: potentially excessively large
quantities and/or abnormally long use and/or
preparing different recipes at short intervals),
the electronic protection will be triggered to pre-
serve the motor; in this case, the appliance will
stop functioning and the message ‘SECU’ will be
displayed on the LCD screen of the control panel
to indicate that the appliance is temporarily out
of service.
If ‘SECU’ is displayed on the control panel and
your appliance stops working, proceed accor-
dingly:
• Leave your appliance plugged in, do not press
the ‘0/1’ switch
(H)
.
• Please refer to the recommendations in the
instructions and readapt your use of the ap-
pliance (see paragraph ‘FIRST USE’: amount of
ingredients/recipe preparation time/tempera-
ture/type of accessories).
• Allow the motor to cool down for half an hour.
• Restart the appliance by clicking on the ‘Start /
Stop/Reset’ button for two seconds
(B5)
.
Your appliance is now ready to be used again.
For further information, customer service de-
partment is at your disposal (see details in the
guarantee booklet).
IMPORTANT - ‘MAKING YOUR APPLIANCE SECURE’ INSTRUCTIONS ( ‘SECU’ )
• The appliance should not be immersed. Never
put the motor unit (A) under running water.
Once you have finished using it, disconnect
the appliance.
• Clean the bowl immediately after use to avoid
staining.
• Press the locks
(D2)
then lift the bowl
assembly
(D)
.
• Place the bowl on a flat surface.
• Unlock the lid by rotating one quarter of a turn
clockwise. Carefully remove the lid.
•
Take care with the knives of the ultrablade
knife (F1) and the kneading / grinding knife
(F4) when you are cleaning them and when
you empty the bowl, they are extremely sharp.
• When the parts have cooled down:
- dismantle the common spindle
(D3)
, the seal
(D4)
and the locking ring
(D5)
(See Fig. 13)
.
- clean the bowl
(D)
, the common spindle
(D3)
, the seal
(D4)
, the locking ring
(D5)
,
the accessories
(F1), (F2), (F3), (F4), (F5)
,
the steam regulator cap
(E1)
, the lid
(E2)
,
the seal
(E3)
,and lid seal
(E4)
using a
sponge and some soapy water.
• Rinse these different parts under running water.
• For baked-on food, let the bowl soak for several
hours in water and dishwashing detergent and
scrape, if necessary, with a spatula
(G)
or with
the abrasive side of a sponge.
• If there is a build up of limescale in the bowl,
use a damp sponge and, if necessary, white
vinegar.
• To clean the motor unit
(A)
, use a damp cloth.
Dry carefully.
CLEANING YOUR APPLIANCE
MANUAL MODE
1- Press directly on the button
for the setting you want
to adjust, i.e. the speed
selector
(B1)
or the cooking
temperature selector
(B2)
or
the time selector
(B3)
, the
chosen parameter flashes
on the screen
(C5-C6-C7)
.
2- Then adjust the setting(s)
using the +/- selector
(B6)
.
For safety reasons, it is not
possible to set a temperature
without setting a cooking
time.
3- When you have finished
entering all your settings,
press the
“start”
button
(B5)
. When your appliance is
using cooking mode, the red
indicator light, lights up to
inform you that cooking has
started. When the program
has started, you have the
possibility of stopping the
appliance at any time by
pressing the
“stop”
button
(B5)
.
The program is then in pause mode and you
have the possibility of restarting by pressing
“start”
again. If you have chosen the wrong
program and if you want to cancel it, press and
hold the
“stop”
button for 2 seconds.
4- When the program has ended, the appliance
sounds 3 beeps.
5- Press the locks
(D2)
and then remove the
bowl assembly
(D) (See Fig. 12)
.
COOKING WITHOUT THE LID
You can brown foods in your bowl without the lid
while stirring and monitoring the cooking.
(See
Fig. 16)
.
For this method of cooking you must select a
temperature ranging from 135°C to 150°C. Set
the operating time (up to 20 min).
The COOKING WITHOUT A LID mode is not suitable
for making jams and milk-based preparations
(risk of overflowing).
Summary of Contents for FE90C160
