STEP 2
Assemble Handles and Handle Brackets
FIGURE 5
NOTE:
If your Teeter came with an optional Caddy (included
with the LX9), stop here and open the Caddy packaging.
Follow the included instructions to attach the Caddy to the
Left Handle before assembling the Handles to the A-Frame.
IMPORTANT:
Do not fully tighten the bolts until all the bolts
have been screwed into the Handles
AND
the Handle Brackets.
Handle Assembly
• Locate the Right and Left Handles and the Handle Hardware Kit
including (6) Handle Bolts.
• Noting Left and Right markings, align the Right Handle with
the Right side of the A-frame and hand tighten (3) Handle Bolts
(Figure 5 and Figure 6).
• Repeat these steps on the Left side of the A-Frame to assemble
the Left Handle.
Handle Bracket Set Assembly
• Locate the Handle Bracket Set, (4) Handle Bracket Bolts and
(4) Handle Bracket Screws included in the Handle Assembly
Hardware Kit.
• Noting Left In/Out and Right In/Out markings, sandwich the Left
Handle Bracket Set over the area where the Left Handle meets
the A-frame by clamping both sides of the Handle Bracket Set
together (Figure 7 and Figure 7a).
• Align (2) Handle Bracket Bolts through the Bolt holes in the
Handle Bracket Set and loosely secure the (2) Handle Bracket
Screws into the Bolts using (2) 5mm Allen Wrenches (Figure 8).
• Repeat these steps on the Right side to assemble the Right
Handle Bracket Set.
• Fully tighten all the Handle Bolts with the 5mm Allen wrench.
• Fully tighten all the Handle Bracket Bolts and Screws using
(2) 5mm Allen wrenches (Figure 9).
FIGURE 6
FIGURE 8
FIGURE 9
FIGURE 7
FIGURE 7a
For All Models
7
