AT TAC H AC U PR E S S U R E N O D E S
(OPTIONAL)
Figure 38:
Start with the smaller nodes and
work your way up to the larger ones. The ideal
placement of the nodes depends on where your
muscle tension points align with the slots in the
table bed.
The pressure of the nodes will vary as the
table rotates up or down. The nodes work best
between intermediate to moderate inversion
(20-45 degrees). Full inversion moves the body
away from the table bed and will reduce the
effectiveness of the nodes. While inverted, stay
at a static incline to maintain a steady pressure,
or oscillate (move between different angles of
inversion) for a massaging action.
Use of the nodes may cause muscle soreness.
If you feel any discomfort, decrease or
discontinue use.
Figure 36:
Determine your desired node position
along the table bed. Unscrew the black backing
from the node and insert the backing into the
slot from the rear of the bed so the threads are
visible from the front.
Figure 37:
Twist the node clockwise into the
backing to secure. Do not overtighten to avoid
damaging the node.
Repeat, as desired, with additional nodes.
To shift node placement within a track, simply
loosen the backing and slide the node in the slot.
Use Instructions
Figure 36
Figure 37
Personalize the intensity and target zone of the Acupressure Nodes by positioning the varying
sizes along the bed tracks as desired.
Figure 38
S T E P 1 1
19
Summary of Contents for EP-560
Page 24: ...This page intentionally left blank 22 ...
Page 27: ......
