5
STEP
Install the EZ-Up Rack into Doorframe
FIGURE 12
FIGURE 13
Plastic Rotating Lock
(Locked)
• With the Upper Bar facing you, hold the EZ-Up Rack near the ends of
the Lower Bar. Slide the flared end of the Large Straight Bar into the
U-Shaped Rest in the RIGHT locking bracket (Figure 12).
• Extend the length of the EZ-Up Rack until the flared end of the Small
Straight Bar can slide into the U-Shaped Rest in the LEFT locking
bracket, NOT to exceed 36 in (91.4 cm) wide.
• Lock the EZ-Up Rack into the Locking Brackets by snapping the plastic,
rotating locks over the top of the Lower Bar (Figure 13).
• If the EZ-Up Rack interferes with normal passage through the doorway,
remove the EZ-Up Rack from the doorframe after each use by rotating
the plastic, rotating locks off the Lower Bar and lifting the EZ-Up Rack
out of the U-Shaped Rest.
Failure of the rotating lock to snap over the Lower Bar is indication
of improper assembly and if not corrected, could result in serious
injury or death! Always ensure the Locking Brackets are locked
securely over the Lower Bar before use.
WARNING
!
10
U-Shaped
Rest
