
7
STEP 2
• Locate the Table Bed Assembly Hardware Kit (HK1010).
• Place the Table Bed face down on the floor and push down on the
Support Beam, so the two holes align evenly with the holes at the
base of the Upper Support Arms (Figure 4). You may have to exert
extra pressure to ensure that the Support Beam slides over the
rubber spacers.
• Insert the two Bolts into the open holes. Fasten each bolt with a
Washer and Nut (Figure 5).
• Using the 6mm Allen Wrench provided to steady the bolts,
tighten the nuts onto the bolts with one of the 10/13 mm
Open Ended Wrenches.
Assemble Table Bed Support Arms
FIGURE 4
FIGURE 5
1
2
1
- Support Beam
2
- Upper Support Arms