
STEP 1
Assemble A-Frame Base & Traction Support Handles
• On a level surface, position the A-Frame so that it is standing upright
and the Stability Feet are on the ground.
• Gently push down on the Spreader Arms to ensure they are fully open
and in the “locked” position (Figure 1).
• Look for temporary circular assembly assistance labels on the
A-Frame.
RIGHT, LEFT, FRONT,
and
REAR
indicate your position while
using the equipment, not facing it. These labels can be removed easily
upon completion of assembly.
Assemble Traction Support Handles
• Locate the Handle Assembly Hardware Kit (HK1009).
• Insert the Left and Right handles into the A-Frame (Figure 2a).
• Insert the Hex Bolts from inside of the A-Frame and fasten with
the Nuts from the outside of the A-Frame (Figure 2b).
• Tighten with the wrenches provided.
Assemble Hinge Covers to Hinge Plates
• Locate the Hinge Cover Assembly Hardware Kit (HK1002).
• Select the corresponding Hinge Covers for the left and right sides of
the A-Frame by aligning each with the shape of the Hinge Plate
(Figure 3).
• Secure with (2) Allen Head Bolts for each side using a 5mm
Allen Wrench provided. Be careful not to overtighten.
6
REV.
DESCRIPTION
REV.DATE
APP.DATE
APPROVED
說明書-0513 2015/5/11
D
細部放大圖 D
比例 1 : 7
C
A
B
D
E
6
5
4
3
2
9
8
7
C
A
B
D
E
F
G
H
1
2
3
4
5
6
7
8
9
F
G
H
1
- Spreader Arms
2
- Crossbar
LEFT
RIGHT
FIGURE 1
1
2
REAR
FRONT
FIGURE 3
LOCKED
FIGURE 1a
UNLOCKED
FIGURE 2a
FIGURE 2b