Owner’s manual
Owner’s manual
22
23
EN
EN
CLEANING AND STORAGE
•
Before cleaning make sure the appliance is turned off, disconnected
from power supply socket and that it has cooled down.
•
Do not immerse the appliance in water!
•
Clean the housing of the appliance with soft and slightly damp cloth.
•
Clean the attachments under warm running water or in a dishwasher
straightaway after usage so that residues of food will not dry on. Then
wipe them dry.
•
Clean the bowl, cover and spatula under warm running water
straightaway after usage so that residues of food will not dry on. Then
wipe them dry.
•
Do not use any abrasives or chemical agents to clean this appliance.
•
Before storing the appliance make sure it is clean, dry and
disconnected from power supply.
COOKING TIPS
•
Refrigerated ingredients, such as butter and eggs, should be at room
temperature before mixing. Make sure to take out those ingredients
from the refrigerator before mixing.
•
To eliminate the possibility of shells in your mixture, break eggs into
separate container first and then add them to your mixture.
•
Do not overbeat. Make sure to mix only for the time indicated in the
recipe.
•
Mixing time and achieved results depend on the temperature and
texture of used ingredients.
9. When mixing is completed, set the speed control switch to the 0
position and disconnect the appliance from power supply socket.
10. Wait until the attachments stop rotating completely, press the tilt
head release button and tilt back the head.
11. Remove the attachments according to the instructions included in the
“Removing the attachments” section.
12. Clean the appliance according to the instructions included in the
“Cleaning” section.
It is possible to use the hand mixer separately without the base and bowl.
1. Make sure the appliance is turned off (speed control switch is set to
the 0 position) and disconnected from power supply.
2. Fit the attachments to the hand mixer according to the instructions
included in the “Fitting the attachments” section.
3. Connect the plug of the appliance’s power cord to the wall outlet.
4. Dip the attachments into the food mixture before turning on the
appliance.
5. Set the speed control switch to the desired position depending on the
type of food.
6. When mixing is completed, set the speed control switch to the 0
position and disconnect the appliance from power supply socket.
7. Wait until the attachments stop rotating completely and pull them out
from the food mixture.
8. Remove the attachments according to the instructions included in the
“Removing the attachments” section.
9. Clean the appliance according to the instructions included in the
“Cleaning” section.
USING THE HAND MIXER
SPECIFICATION
MAIN FEATURES
Turbo function
5 speed settings
Eject button
Rotating bowl with cover