EN
Owner’s manual
8
•
Do not turn on the kettle if there is no water.
•
Do not touch the surface of the kettle when it is filled with hot water; to operate the kettle use the
handle and knobs. Housing of the kettle may increase its temperature - risk of scalding!
•
Warning: If the kettle is overfilled, boiling water may be ejected.
WARNINGS
•
Use only cold water when filling the device.
•
The water level must be between the MAX and MIN marks.
•
Switch the kettle off before removing it from the base.
•
Always ensure that the lid is tightly closed.
•
The base and exterior of the kettle must not become wet.
•
Kettle body used must match with the kettle base.
oPERATIoN
Before using the kettle for the first time, fill the kettle with cold water and boil it. After the kettle switches
off automatically, pour the water out, and repeat the process.
1. Fill the kettle with water. Do not overfill, make sure the water level is between MAX and MIN
markings. Close the top lid of the kettle (if the lid will not be closed, the kettle will not switch off
automatically after boiling is finished).
2. Place the kettle on the base.
3. Connect the kettle to 220-240 V, 50/60 Hz socket.
4. Switch the kettle to ‘1’ position. The illumination of the kettle indicates that the water is being boiled.
5. After boiling, the kettle switches off automatically. Do not open the lid when pouring out the water.
If the kettle is overfilled, boiling water may be ejected - RISK OF SCALDING!
MAINTENANCE AND CLEANING
Always remove the plug from the mains supply before cleaning the kettle.
Clean the unit’s exterior periodically with a soft, slightly damp cloth. Never use chemical agents to clean
this device. Do not use abrasive scouring pads or powers. Do not immerse the kettle in water or other
liquids.
After some time, depending on the nature of your water supply, a boiled scale deposit is naturally formed
and can be found mostly adhered to the heating element, thus reducing the heating efficiency. The
amount of boiled scale deposited largely depends on the water hardness in your area and the frequency
with which the kettle is used. Boiled scale is not harmful to your health, but gives a powdery taste to your
drinks if water poured into them was boiled in scaled kettle. The kettle should be descaled periodically
as indicated below:
DESCALING
1. Fill the kettle up to MAX with a mixture of one part ordinary vinegar and two parts water.
Switch on and wait for the liquid to boil and appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to MAX mark and boil again.
