Teesa ECO WHITE 700, Owner'S Manual

Page: 16 / 44

EN
Owner’s manual 16
Important
If any blockage is found in the hose, tube or the nozzles, the device can
continue to operate only after the blockage is removed. Do this only when
the device is turned off and disconnected from power supply.
Changing the dust bag
Note:
• When the Dust bag full indicator lights red, it indicates that the dust
bag needs to be replaced.
• The Dust bag full indicator also lights red when the nozzle, tube or
filter is blocked by dirt. Get rid of dirt or a blocked object and turn on
the appliance again.
• Before changing the dust bag make sure the appliance is disconnected
from the power supply socket.
1. First, remove the hose from the hose socket. Grasp the end of the hose,
turn it counterclockwise to release it from the hose socket and pull it
out.
2. Release the front cover fastening and open the front cover.
3. Slide the dust bag out of the holder:
• paper dust bag- it should be replaced with a new one each time.
4. Insert a new paper dust bag in the holder.
5. Close the front cover.
Removing and cleaning filters
Note: Before removing or changing the filters make sure the appliance is
disconnected from the power supply socket.
Motor filter
1. Press the front cover release button and open the front cover.
2. Remove the dust bag.
3. Grasp the filter and pull it out.
4. Clean the filter by tapping out the dirt.
5. It is recommended to rinse the filter under running water once a six
months or when the filter is so heavily soiled that it obstructs the
suction. Do not wash the motor filter in a washing machine!
Note:
Let the filter dry completely before reassembly! Let it dry in an
open area.
6. When the filter is clean and dry, put it back into place, install the dust
bag and close the front cover.