Teesa ECO WHITE 700, Owner'S Manual

Page: 15 / 44

Owner’s manual 15
EN
33. DO NOT use this appliance if the cord or the plug is damaged, or the
appliance is broken.
34. Do not attempt to repair this appliance yourself. Only authorized and
qualified personnel may repair this appliance. Never disassemble this
appliance.
35. Do not use unauthorized accessories.
36. Make sure the power cord does not touch any hot or sharp elements.
Note: Before assembling or disassembling accessories, always remove the
plug from the power supply socket.
1. Insert the hose in the hose socket and turn it clockwise to lock it in
place.
2. Connect the hose to the telescopic tube. Proper installation is indicated
by an audible click.
3. Insert the telescopic tube into the selected nozzle.
4. Use the length lock to adjust the telescopic tube to the desired length.
5. Grasp the plug and pull it to remove the cord and connect it to the
power supply socket.
Note:
• Always pull the plug, not the cord!
• A yellow mark on the cord indicates optimal length. Do not pull the
cord beyond the red mark.
6. Press the Power button to turn on the vacuum cleaner.
7. Use the Power control slider to adjust the power.
8. Use the suction power slider to adjust the suction power. Move it
forwards/backwards to reduce/increase suction power.
9. Start vacuuming.
Note:
• Never start vacuuming if the dust bag is not installed.
• While vacuuming make sure that you don’t pull the power cord over
sharp edges.
• Do not stand on the hose.
10. When you have finished vacuuming, press Power button to turn off
the appliance.
11. Disconnect the plug from power mains supply and press Cord rewind
button to rewind the cord.
Note:
• Always pull the plug, not the cord!
• While rewinding the power cord, guide it with a hand to ensure that
it does not whip causing damage or injury.
ASSEMBLY AND OPERATION