Teesa Aroma 800 Owner'S Manual Download Page 12

Page: 12 / 39

time of frothing the milk.

3. In the "Water" option, the amount of water is selected in hot water mode.
4. In the "Milk" option, the amount of milk is selected in hot milk mode.

Descale

1. Add descaling agent for coffee machines to the water container according to the

detergent manufacturer's recommendations.

2. If the water container is not full, refill it with water.

3. Select "Descale"

in the settings menu.

4. The water pump will run for 30 seconds, then will pause for 3 minutes and restart the

pump for 30 seconds. The device will perform 11 such cycles.

5. After finishing work, pour out the contents of the water container and refill it with clean

water, then press the "OK" button

6. The device will clean the remaining elements and will stop working after pumping about

1 liter of water.

Clean

1. Select "Clean"

in the settings menu.

2. Connect the rubber tube to the opening of the milk frother and insert the other end into

a vessel with clean water.

3. Press "OK" button to start process.

Eco Time

1. Select "Eco Time"

in the settings menu.

2. Select the time after which the device, which is not being used, enters the sleep state.
3. Confirm with "OK"button.

Language

1. Select "Language"

in the settings menu.

2. Choose the language and confirm with "OK" button.

Factory reset

1. Select "Factory reset"

in the settings menu.

2. Confirm reset with "OK" button.

Cup counter

1. In the settings menu, press the

button located in the lower right corner of the

screen.

Fan settings

1. Select "FAN" in the settings menu.
2. Select "ON" or "OFF" option.

Note:

It is recommended that you set this feature to On. This is helpful in removing excess water

vapor from the device.

Grinding level of beans

1. To set the grinding level of beans, use the knob next to the coffee beans insertion hole.
2. If anti-clockwise adjusted, the powder size will be fine and coffee taste stronger.
3. If clockwise adjusted, the powder size will be coarse and coffee taste weak.

COFFEE PREPARATION

1. Place a cup under the coffee outlet.
2. Connect one end of the rubber tube to the milk frother.
3. Place a container with milk next to the coffee machine and insert the other end of the

rubber tube into it.

4. On the screen, select the desired coffee, its strength, amount and time of frothing the milk.
5. Confirm with "OK" button.
6. The coffee-making process can be interrupted by touching the X button on the screen.
7. The coffee-making process can be interrupted by touching yellow coffee icon on the

screen.

Coffee powder brew function

1. The device has the function of preparing pre-ground coffee.
2. To activate this mode, press the "Powder" button on the main screen.
3. Pour one spoon of ground coffee into the hole next to the coffee beans.
4. Select desired coffee on the main screen and confirm with "OK" button.

CLEANING

• It is recommended to rinse the water container at least once a day.
• Brewing unit should be cleaned at least once a week using dry cloth.
• The milk frother tube should be cleaned after each use.
• Dump container and drip tray should be cleaned at least one a week.
• If the machine is not used for a long time, it is recommended to clean all elements so as to

leave the machine clean.

• Milk frother cleaning:

1. Press Part A and Part B to disassemble the milk frother system from the coffee

machine.

2. Remove Part C from the milk frother.
3. Use running water to remove the remaining milk inside
4. Place Part C back into the milk frother. Remember to properly match it with the holes

in the frother.

Owner’s manual