TeeJet MATRIX Blanchard REB3, Installation Manual

Page: 5 / 12

www.teejet.com
5
Pos. Description Part Number
1 MATRIX
TM
Guidance Controller * xxx-xxx
2 Power/CAN/Data Cable, MATRIX
TM
45-05626
3 Power Cable, w/COBO connector 45-05648
4 Section Driver Module 78-05072
5 Switch box, 11 se Master 901-000
6 Adapter Cable 198-343
7 Optima Module Interface 900-995
8 Blanchard REB3 Controller -
* Depending on MATRIX TM Kit
SYSTEM DESCRIPTION, MATRIX
TM
Pos. Description Part Number
A 8P Connector (Power/CAN/Data to Matrix)
B 9P Connector (Data in/out, Sub.D. Female)
C Fuse (3A) 166-603
D 3P Connector (Power, COBO)
E Fuse (3A) 39-00000
F 2P Connector (System Power)
G 4P Connector (CAN, Matrix and Section Driver Module)
H 2P Connector (Power to Matrix Controller)
I On-off Switch (Switch box)
J 28P Connector (Connection to Switch box)
K 35P Connector (Boom Section I/O to Section Driver Module)
L 14P Connector (CAN to Section Driver Module)
M 16P Connector (Boom Section I/O to OPTIMA Interface)
N 5P Connector (CAN/Power Connection to REB3 Controller)
Connectors and fuses
:
Connect the Automatic Boom section kit as shown on the system overview drawing. The kit
includes all necessary parts to get electrical contact with the Blanchard REB3 system.
INSTALLING THE BLANCHARD REB3 KIT
As shown in System Overview, the Optima Module Interface (Pos. 7) serve as a Link between the
Blanchard REB3 Controller (Pos. 8) and the Section Driver Module (Pos. 4).