www.teejet.com
10
LED’S ON THE SECTION DRIVER MODULE
Section Power
:
ON when power is available for the section drivers.
I/O error
:
Should normally be OFF
(Auto Mode: ON when automatic boom switching is active).
CAN Data
:
ON is flashing when it communicates with the CenterLine 230.
CAN Power
:
ON when power is applied to the CenterLine 230 and the SDM.
LED’S ON THE OPTIMA INTERFACE
On
:
ON when power is available for the interface.
Tx Bus Can
:
Flashing when it transmit data.
Rx Bus Can
:
Flashing when it receive data.
