22
M.
SECOSTEEL-PRO 30R290
-01 Manual _ITA_UK_DE_FR_ES_DK - 23/04/2021
EN
1
INTRODUCTION
1.1
General instructions
The original manual was written in Italian.
The manual is intended for the end user only for operations that can be performed with closed
panels.
Operations requiring the opening of doors or panels with tools must be performed
only by expert personnel
. Each unit must be connected to the power supply via a cable with a
power plug in the unit with the unit
For maintenance operations, the power plug must always be disconnected allowing the operator to
intervene in safe conditions.
To identify the unit (model and serial number), in the event of a request for assistance or spare
parts, read the identification plate located outside the unit.
1.2
Reference standards
The appliance described in this manual has been designed in accordance with the European and
international reference technical standards.
The appliance meets the essential requirements of the following European Directives:
•
Electrical safety for low voltage applications 2014/35/UE,
•
Electromagnetic compatibility 2014/30/UE,
1.3
General safety rules
The purpose of the manual and all the documentation supplied with the system is to enable
both the installer and the operator to correctly install, start up and maintain the appliance,
without causing damage. to the staff and to the unit.
Every unit is subject to a risk assessment carried out in compliance with the current legislation that
defines the necessary actions and implements the protective measures necessary to achieve the
risk reduction objectives.
It is advisable to perform all the activities related to the operation and maintenance of the unit:
•
Only by appropriately trained persons who must adopt safe working practices and use
PPE appropriate to the specific task performed, based on their specific qualification.
•
Only by appropriately trained persons who have completely read and understood the
manuals, technical documents and security documents.
•
• Access to the appliance must be denied to anyone who is not adequately trained and
competent.
Manuals, wiring diagrams and documentation attached to the unit must be read and kept for the
entire life of the appliance.
Warning:
This appliance is designed for use in an indoor environment.
Warning:
The appliance must be installed in compliance with local wiring regulations.
Warning:
The appliance must be installed respecting the dimensions and the necessary spaces
including the minimum spaces allowed by the adjacent structures.
Warning:
This appliance must always be connected using plugs with a grounding cable, as
required for all electrical applications; Productor declines all responsibility for any danger or damage
caused if this rule is not respected.
Warning:
This appliance has been designed and built in accordance with the strictest safety rules.
Consequently, sharp instruments (screwdrivers, needles or similar) must not be inserted into the
grids or any other openings in the panels, especially when the unit is open to remove the filter.
