P. 10
LX-(Q)-GSM / LX-(Q)-NET Techn. Docum. + Installation
01-2016
For LX-NET / LX-Q-NET :
NETWORK CONNECTION
Netzwork connection:
The LX-(Q)-NET device has a directly connectivety to
LAN/Ethernet network with 10 / 100 Mbit TCP/IP protocol.
Inside the housing you find the RJ45 jack for connecting a CAT-5
network cable. The plug of the network cable has to be pushed
through the inlet at bottom side of the housing.
Additional documentation:
See documentation “
Devices with network bindung
“.
The LX-(Q)-NET supports DHCP protocol. The device should get
a fixed IP. The network parameter setup has to be done
at menu item “15.Network“.
After that and after parameter setup at your network router the
device can be called directly by a browser.
Remote controlling of the relay:
The LX-NET device supports a remote control function for the relay.
Since version V3.42 respectively V4.02 the output relay can be operated by remote commands
from browser at the ‘CONFIG’ page of the LX-NET device.
Deactive = No switching
Active = State depends on level.
On = Makes the relay operate (fix).
Off = Makes the relay release
state (fix).
