P. 5
Manual GSM-Messenger
08-2019
Insertion of the SIM card
A SIM card (prepaid or contract) needs to be inserted into the GSM radio module.
IMPORTANT: The SIM card has to be registered and activated.
After the insertion of the SIM card the device requests to set the PIN code, see page 4.
The sending fees for the SMS reports will be invoiced to the cardholder.
’RESET’:
In case of a device error a software reset possibly solves the error situation.
Therefore shortly press both buttons.
The adjusted parameters will remain unchanged.
’RESET+Clear’ :
The GSM-Messenger software can also be reset into the original delivery status.
Therefore press both buttons simultaneously and hold them for 5 sec.
During this process all registers and parameters will be reset.
Subsequently the
PIN code
of the SIM card needs to be
reentered
.
After the modem reconnection the tank reregistration (tank order) possibly needs
to be carried out again.
The commands #T and #H and all further commands need to be reset via SMS.
plus / test OK button
GSM module
SIM
card
µP
Status LEDs
1
2
3
4
Inputs
A1 | A2
3 | 4 5 | 6
Electronic
oil tank indicator, e.g.
Tankspion-Digital LX-2,
for tank 1
PC-Link input
1 | 2
7 | 8
Input A3
Contactor for alarm
input A3
(additional module,
optional)
Contactor for alarm
input A1 resp.
counter input 1
PE L N
Main supply 230 V~
Contactor for alarm
input A2 resp.
counter input 2
Transformer
If available: Further
electronic oil tank
indicators for tanks
2,3,4
