TECshow RAZOR 7 QUAD, User Manual

Page: 10 / 28

4.3 DMX Controller
By using a universal DMX Controller to control the units, you
will need to set DMX address from 1 to 512 so that the units
can receive DMX signal
Press the MENU button up to when the DMX Adress is show-
ing on the display.Pressing ENTER button and the display
will blink. Use DOWN and UP button to change the DMX512
address. Once the address has been selected,press the EN-
TER button to setup,to go back to the functions without any
change press the MENU button again.Hold and press the
MENU button about one second or wait for one minute to exit
the menu mode.
Please refer to the following diagram to address your DMX512
channel for the first 4 units.
Channel mode Unit 1 Address Unit 2 Address Unit 3 Address Unit 4 Address
9 channels
1 10 19 28
12 channels 1 13 25 37
16 channels 1 17 33 49
4.4 DMX 512 Configuration
9 Channel Mode:
Channel List Value Function
CH1 000-255 Pan(0-630)
CH2
000-255 Tilt(0-240)
CH3 000-255 Strobe
CH4 000-255 Red (0%-100%)
CH5 000-255 Green (0%-100%)
CH6 000-255 Blue (0%-100%)
CH7
000-255 White (0%-100%)
CH8 000-255 Dimmer (0%-100%)
CH9 000-255 Sound active
RAZOR 7 QUAD
ENGLISH VERSION
p. 10