MADBOX XL 3-IN-1
P. 3
ENGLISH VERSION
Warning
For your own safety, please read this user manual carefully before your initial start-up
Introduction
THANK YOU FOR USING
MADBOX XL 3-IN-1
PLEASE READ THE MANUAL BEFORE OPERATION
Before delivery, this device has passed strict inspection,
Please follow the user manual strictly for operation, if this
fixture is damaged by improper operation and mistake,
the fixture will be out of warranty, and manufacture or
dealer won’t be responsible for it. In case of any technolo-
gy change in this manual, we won’t advise in further.
Safety Instructions
•
Once after received this product, check everything
carefully. And check cautiously whether the prod-
uct was damaged or not during the transporta-
tion; if it is, please contact immediately local
dealers or manufacturers.
•
Keep this device away from rain and moisture!
Unplug mains lead before opening the housing!
•
The applicable temperature for the lighting is be
low 40°C. Do not use the lighting above that temperature.
•
The fixture applicable widely, must be kept clean;
Please do not use the product in an overheat or
dusty environment. Do not use Chemical liquid.
•
You should pay special attention on how to use this
product and read the instructions before installa-
tion. Follow the safety instruction and pay atten-
tion to the manual and warning signs on the equip-
ment, if you have any other questions about how
to operate the equipment, please contact the deal-
er or manufacturer as soon as possible.
•
According to the procedures described in this
operating instructions, please do not open the
product by yourself. lf any break, please contact
professionals for repair.
•
Do not turn on the product before installation.
Let the product rest when using it for continuous
eight hours of work. This will help extend it’s life.
•
Fixed installation, to prevent the strong vibration
or impact of the device.
•
The distance between the device and the projec
tile to keep at least 0.5 meter.
•
Never look directly into the light source,as sen-
sitive persons may suffer an epileptic shock(espe-
cially meant for epileptics)!
•
When light output position of the device of dustproof
glass breakage, cracks or other visible damage, user
should replace the new glass to continue to use.
The manufacturer will not accept liability
for any resulting damages caused by the
non- observance of this manual or any
unauthorized modification to the device.
