Tecomec Sharp Master, Use And Maintenance Manual

Page: 10 / 72

8
EN
- Have defective switches replaced by an authorized
service centre.
- Do not use the tool if the switch does not turn it on and
off.
21. Warning
- The use of any accessory or attachment other than one
recommended in this instruction manual may present
a risk of personal injury.
22. Have your tool repaired by a qualified person
- This electric tool complies with the relevant safety rules.
Repairs should only be carried out by qualified persons
using original spare parts, otherwise this may result in
considerable danger to the user.
23. Warning
- Never stop the grinding wheel with your hands, even
after the motor has been switched off.
2. GENERAL INFORMATION
The manufacturer is not liable for damages in the following
cases:
- failed observance of the instructions given herein;
- use of the appliance other than that described in the
“INTENDED USE” section;
- failed use in compliance with current standards on Health
& Safety at the workplace;
- Incorrect installation;
- lack of scheduled maintenance;
- modifications or jobs that are not authorized by the
manufacturer;
- use of non-original or inadequate spare parts;
- repairs that are not carried out by a specialist.
3. WARRANTY
The warranty validity is that acknowledged in the coun-
try of sale. Claims under warranty will only be accepted
if they are backed-up by the copy of the purchase
document (bill or receipt) and product packaging (if
possible intact).
The guarantee becomes void if:
a) the appliance has been tampered with;
b) the appliance has not been used according to this manual;
c) non-original parts, appliances or grinding wheels have
been fitted on the grinder or other parts that are not
authorized by the manufacturer;
d) the appliance has been powered at a voltage or frequency
different from that written in the rating nameplate.
The warranty does not cover:
any mechanisms or parts affected by wear (such as the
abrasive disk/grinding wheel, the motor carbon brushes,
vice, electrical switches and adjustment devices/knobs).
4. USING AND KEEPING UP THE OWNER’S
MANUAL
The characteristics and the information given in this manual
are merely indicative. The manufacturer reserves the right to
add any modifications to the grinder considered necessary
at any time.
It is forbidden to reproduce any part of this document without
authorization on behalf of the manufacturer.
The owner’s manual is integral part of the appliance and
must be kept in a safe place so that it can be consulted
whenever need be.
If you should loose your manual or it should deteriorate, you
can request your dealer or an authorized service centre for
another copy.
The manual shall accompany the appliance at all times,
especially if it is sold on at a later date.
5. DEFINITIONS
Skilled technician: a person who is generally employed
by the service centre and who is trained to carry out ex-
traordinary maintenance jobs and repairs on the appliance.
6. SYMBOLS
This symbol points out the possibility of
serious personal injuries if the provisions and
instructions are not complied with.
This symbol points out that the user must wear
protection goggles when he uses the appliance.
This symbol points out that the user must wear
protective gloves when he uses the appliance.
This symbol points out the correct running
direction of the appliance (grinding wheel).
Read the instructions before using the machine
This symbol (on the rating nameplate) points
out that the product must not be disposed of
with normal household garbage. Contact an
authorized shop or your dealer for disposal
instructions.
7. TECHNICAL DATA
Model Sharp Master
Voltage 230V~ 50Hz 120V~ 60Hz
Rated power 85W 85W
Grinding wheels
dimensions
Outside Ø.105mm - InsideØ 22.2mm
Thickness: 3.2 mm
Maximum speed of
grinding wheel
7000 min
-1
Operating time 10 min
Acoustic pressure level Lpa=54,1dB(A),K=3dB(A)
Acoustic power level Lwa=67,1dB(A),K=3dB(A)
Level of vibrations on
operating handle (* )
< 2,5 m/s
2
Types of chains that
can be sharpened
1/4” - .325” - 3/8” - .404”
Weight (complete
machine)
1,6 Kg (15,2 N)
(*) - The declared vibration total value has been measured in
accordance with a standard test method and may be used for
comparing one tool with another.
- The declared vibration total value may also be used in a
preliminary assessment of exposure.
- While the electrical appliance is being used, the vibration
emission value may vary from the stated value depending
on how the appliance is used;
- Keep any stress caused by vibrations as low as possible.