Tecomec Baby Jolly 120Vac, Owner'S Manual

Page: 10 / 52

Issued by the Technical Assistance and Publications Office
ALL RIGHTS RESERVED
A copy of this manual is delivered with each grinder.
NB: The descriptions and illustrations contained in this manual are not binding. The manufacturer reserves the right to bring about
any modifications without updating this manual.
ELECTRICAL CHAIN GRINDER FOR SAWS
baby jolly
230Vac –
baby jolly
120Vac –
baby jolly
12Vdc
CHARACTERISTICS OF THE MACHINE:
- Manufacturer: Tecomec SpA - Via Secchi, 2 – 42011 Bagnolo in Piano - Reggio Emilia - ITALY
- Machine: Electrical chain grinder
baby jolly
for saws
DATA AND MODELS:
- models: baby jolly 230Vac – baby jolly 120Vac – baby jolly 12Vdc
- Installed power: electrical motor 50Hz 85
W
voltage 230Vac – 60Hz 85
W
voltage 120Vac – 85
W
voltage 12Vdc
- insulation class II
- grinding wheel dimensions: outside diameter 105mm, inside diameter 22.3mm
- thickness: 3.2 - 4.7 mm
- maximum speed: 5000 min
-1
(15 min.)
- sound pressure level: 76dB (A)
- level of vibrations transmitted to the handle: < 2,5 m/S
2
- type of chains: pitches 1/4” - .325” – 3/8” - .404” – 1/2”
- weight of the complete machine: 19.6N (2 kg)
- accessories provided: 1 wheel (thickness: 4.7mm), 1 wheel guard, 1 dressing stone; 1 template ; 1 handle. 1 screw M6x25
INTRODUCTION:
Keep this manual with care.
To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this manual carefully. This
manual explains the operation of the machine components and provides instructions for carrying out the checks and maintenance required.
WARNING – Any maintenance operations not described in this manual shall only be carried out by an authorized service center.
To guarantee the efficient and consistent operation of your grinder, worn or broken parts shall only be replaced using ORIGINAL SPARE
PARTS.
SAFETY RULES:
WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully comply
with the safety rules listed below and as well as with those provided throughout this manual.
1. The grinder shall only be used by adults. Users shall be in good physical condition and familiar with the instructions for use.
2. Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.
3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.
4. Never stop the grinding wheel with your hands, even after stopping the motor.
5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.
6. Never start the grinder without the wheel guard in place. The guard is supplied together with the accessories’ bag and must be installed
after assembling the wheel (photo 2). The guard can be removed only while the wheel is being replaced; then, it must be reinstalled.
7. Check that the voltage and frequency indicated on the grinder tag correspond to the mains values.
8. Never use defective and/or non-standard cables, plugs or extension cables.
9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized
dealer or service center. The power supply cable is complete with terminals. For internal electrical connection insert the deeding cable
terminals directly in the switch. The electrical connection to the mains shall be made in order to prevent damages by people or vehicles
which could endanger both their safety and yours.
10. Before starting up the grinder, check that the working area is free of tools or other objects.
11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not
energized. Never work near other electrical cables.
12. Never advance the chain with your hands until the grinding wheel has moved entirely outside the working area.
13. Do not allow other people to remain near the grinder during its operation or to touch its supply cable.
14. Always keep the hand-grips clean and dry.
15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.
16. Check that the machine is properly secured, to the bar of the motor-driven or electrical saw.
17. Always work in a stable and safe position, and be particularly careful.
18. Always comply with maintenance instructions.
19. Before using the grinder, check that all safety (and other) devices are properly working.
20. Never work with a damaged, improperly repaired/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize any
safety devices.
21. Use only the grinding wheels specified in the chain table at the end of the handbook (columns I and L)
22. Never use the grinder as a cutter or for grinding objects other than saw chains.
23. Deliver or lend your grinder only to expert users who are familiar with its operation and correct use.
24. Store your grinder in a dry place, raised off the ground. Keep it away from children.
25. Damage risk, caused by accidental start-up. Do not use in a place where children may be present.
26. The grinder can be used continuously for no more than
15 minutes;
then, turn it off for an adequate period of time.
27. Never let your grinder in the rain, in wet environments, or in any place accessible to children.
28. Never expose your grinder in explosive or inflammable atmosphere.
29. When your grinder can no longer be used, do not abandon it. Take it to your dealer who will store or dispose of it correctly.
30. Always refer to your dealer for any explanations or important maintenance or servicing.
31. Never jerk the cable to disconnect it from the outlet. Keep the cable away from heat, oil, and sharp objects.
ENGLISH
10