Basic documentation for CP-1016 module
13
TXV 110 16
1.2 OPERATIONAL CONDITIONS
Areas -
Č
SN 33 2000-3:1995 (mod IEC 364-3:1993)
normal
Operating temperature range
-20 °C to +55 °C
Permissible temperatures during transport
–25 °C to +70 °C
Relative humidity
10 % to 95 % without condensation
Atmospheric pressure
min. 70 kPa (< 3000 m over the sea level)
Degree of pollution -
Č
SN EN 60664-1:2004 (mod IEC 60664-1:1992)
1
Overvoltage category of installation -
Č
SN EN 60664-1:2004 (mod IEC 60664-1:1992)
II
Working position
vertical
Type of operation
continuous
Electromagnetic compatibility /Emissions
Č
SN EN 55022:1999 (mod CISPR22:1997)
class A
1)
Electromagnetic compatibility/Immunity
min. according to requirements
Č
SN EN 61131-2:2008
Sinusoidal vibration resistance
2)
10 Hz to 57 Hz, amplitude 0.075 mm,
57 Hz to 150 Hz, acceleration 1G
1)
In indoor conditions (i.e. such conditions, where using of radio and TV sets can be supposed in a
distance of 10 m from the mentioned equipment), the product can cause radio disturbances. It might
be required in such cases that the user takes necessary measures to avoid this.
2)
Fc test according to
Č
SN EN 60068-2-6 (idt IEC 68-2-6:1995), 10 cycles in each axe.
1.3 SYSTEM PARAMETERS
Real time circuit (RTC)
yes
Memory of user program and tables
192 + 64 KB
EEPROM program backup memory
yes
DataBox - additional data memory (internal)
512 kB
Internal memory for project archiving
2 MB
Slot for MMC/SD card
yes
RAM and RTC back up
1)
without/with optional back-up battery
typ. 500 hours/typ. 20 000 hours
Cycle time for 1k of log. instructions
0.2 ms
Number of user registers
- remanent registers (from the total number)
64 kB
32 kB
Number of timers (IEC)
4096
Number of counters (IEC)
8192
Instruction length
2 ÷ 10 bytes
CPU series
K
Number of serial channels
2)
2
Ethernet interface 10/100 Mbps
1
TCL2 bus
1
CIB (Common Installation Bus)
1
Integrated web server
yes
1)
Valid for the central unit without supply, when the supply is on, the back-up circuit is disconnected.
2)
CH1 serial interface is fitted with fixed RS-232 interface. CH2 serial interface is optional by means of
exchangeable sub-modules.
3)
The module contains an internal insulation of CIB from power supply. If the input of CIB units is less
then 100 mA it is not necessary to use an external separation module BPS2-01M.
Summary of Contents for CP-1016
Page 2: ......
