TECOM TS1001 User Manual Download Page 2

Page: 2 / 24

Copyright

2015

UTC Fire & Security Australia Pty Ltd.

Trademarks

and patents

The TS1001 Touch Screen Arming Station

name and logo are trademarks of UTC Fire &

Security Australia Pty Ltd.
Other trade names used in this document may

be trademarks or registered trademarks of the

manufacturers or vendors of the respective

products.

Manufacturer

UTC Fire & Security Australia Pty Ltd t/a

Interlogix

A UTC Building & Industrial Systems company

Ground Floor, 10 Ferntree Place

Notting Hill, Victoria 3168

Australia

Agency

compliance

N4131

This product conforms to the standards set by

Standards Australia on behalf of the Australian

Communications and Media Authority (ACMA).

Notice!

This is a Class A product. In a

domestic environment this product may cause

radio interference in which case the user may

be required to take adequate measures.

Contact

information

For contact information, see

www.interlogix.com.au.

Summary of Contents for TS1001

























Search results

Summary of Contents for TS1001

Reviews:

Related manuals for TS1001

Brands by name

Popular brands

TECOM TS1001, User Manual

Search results

Summary of Contents for TS1001

Reviews:

Related manuals for TS1001

Brands by name

Popular brands