IG7500 Administration Manual
- 31 -
4.7.1.3 Restore Default
Click “Restore Default Settings” to restore the factory default settings. This would be
helpful when the settings mass up. After IG7500 returns to factory default settings, the
wizard setup is invoked automatically when the administrator accesses to IG7500’s web
server. (Figure 4-27)
Figure 4-27.
Management – Settings – Restore Default
4.7.2 Access Control
This item allows you to configure some service Ports, enable/disable some services, IP
Address access control, and password for user, support, and administrator.
4.7.2.1 Service
This page allows you to enable the services from being used when “Firewall” (“Advanced
Setup” – WAN” page) is enabled. (Figure 4 -28)
Figure 4-28.
Management – Access Control –Service Port
4.7.2.2 Password
In this page you can define the passwords for administrator, support, and user. The
Administrator has unrestricted access to change and view configuration of your IG7500.
The Support is used to allow an ISP technician to access your IG7500 for maintenance and
to run diagnostics. The User can access the IG7500, view configuration settings and
statistics, as well as, update the router’s software.
Use the password field to enter up to 16 characters. Note: Password cannot contain a
space. (Figure 4-29)