manualshive.com logo in svg

TECOM IG7500, Administration Manual, Page: 27 / 37

Share
Download
TECOM IG7500 Administration Manual Download Page 27

  IG7500 Administration Manual 

 

- 27 - 

FXO/FXS Settings

:

 

Phone Number

: It’s the assigned phone number from uplink server.

 

Auth ID

: The Account ID of registration to uplink server. It’s used for Digest 

Authentication. 

Auth Password

: The Password of registration to uplink server. It’s used for Digest 

Authentication.   

SIP Proxy

: The position of uplink SIP proxy server. IP address and domain name are 

all supported. 

SIP Proxy Port

: The SIP signal port of uplink registrar server. 

Outbound Proxy

: The address of uplink outbound proxy server. All sip request packet 

will be sent to this server that will determine their next hops. 

Outbound Proxy Port

: The SIP signal port of uplink outbound proxy server. 

Register Proxy

: The position of uplink register server. IP address and domain name 

are all supported. 

Register Proxy Port

: The SIP signal port of uplink registrar server. 

Outbound Registrar

: The address of uplink outbound Registrar server. All REGISTER 

packets will be sent to this server that will determine their next hops. 

Outbound Registrar Port

: The SIP signal port of uplink outbound registrar server. 

Register Expires

: It’s the time for IG7500 sends REGISTER to uplink register server. It 

counts based on second. 

RPort

:   

When client is behind a NAT, the rport and received filed can allow SIP proxy to append 
the public IP address and port of NAT and transfer SIP message correctly. Choose 
“Enable” to use this function. 

Server Type

:   

4.6.2 Transmission 

This page allows you to configure the Audio, FXS, and FXO settings. Click “Save Settings” 
button to save the new configuration. (Figure 4-23) 

Summary of Contents for IG7500






































Reviews:

No comments