7
COOL & HEAT mode operation
Power Requirements
DRY mode operation
Outdoor air on temperature should be
between 18
o
C ~ 43
o
C for cooling and 1
o
C
~ 24
o
C for heating. Operation outside
these temperature ranges may eff ect the
performance of the air conditioner.
Room humidity should be lower than 90%.
Otherwise, it is possible for the air
conditioner to form moisture or dew on
the front panel of the air conditioner. This
indicates normal operation.
Rated voltage and voltage range: 230V ±10%
The electric components could be damaged when the voltage is
too high.
If the voltage is too low, the compressor could vibrate violently to
damage the refrigerant system and easily cause the compressor
and electric components not opperate correctly.
All earth leads must be connected.
An approved power outlet must be used. Furthermore, the power
outlet must conform to the wiring regulations.
All electrical wiring and connections must comply to the current
electrical Australian Standards and Wiring ules.
Earth Wire
To ensure the reliable earthing, please do not connect earth wire to water pipes.
Outdoor air on temperature should be
in the range of 18
o
C and 43
o
C. Operation
outside these air on temperature ranges
may eff ect the performance of the air
conditioner.
Please operate the air conditioner in the correct conditions as follows:
Operating Conditions
Summary of Contents for TWW22CFAGJBB
Page 21: ...21 www teco com au LBB PV1 ...
