12
Remote Control
AUTO
NOTE:
Ensure there are no obstructions between receiver (air conditioner front panel) and remote controller.
Do not drop or throw the remote control.
Do not let any liquid in the remote control.
Do not place the remote control in direct sunlight or any location with excessive heat.
Press the SLEEP button to activate or deactivate
the SLEEP feature.
In the cooling mode, the cooling temperature
set point will increase 1
o
C per hour after the
SLEEP mode is selected.
Two hours later, the set point will continue at
this temperature. In the heating mode, the
heating temperature set point will decrease
1
o
C per hour after the mode is selected. Two
hours later, the set point will continue at this
temperature.
Press this button, Auto, Low, Medium, High
speed can be selected. After powered on, Auto
fan speed is selected by default. Under DRY
mode, only Low fan speed is available.
Press this button, the unit will be turned
on, press it once more, the unit will be
turned off . Sleep function will be cancelled,
while unit is off .
When the mains power is switched on, Auto
mode is pre selected.
Under Auto mode, the temperature will not be
displayed.
Pressing this button, Auto, Cool, Dry, Fan, Heat
mode can be selected.
If Heat mode is selected,
the initial set point
temperature is 28
o
C and
if any other mode is
selected, the initial set
point temperature is 25
o
C.
Press the clock button to set up the clock. The
symbol
blinks. Within 5 seconds, the value
can be adjusted by pr or - buttons, if
held down continuously for 2 seconds or more,
for each 0.5 seconds, the value will increase by
10 minute increments. Whilst blinking, press
the clock button again. This symbol
will
be constantly displayed indicating setting is
complete. If the
symbol is displayed, this
indicates the current time value.
If the batteries in the remote controller are
replaced, the time display is 12:00 by default
and the
symbol will be displayed.
Name & Function of Wireless Remote Control
Signal Transmitter
Sleep Button
Fan Button
ON/OFF Button
Mode Button
Clock Button
CLOCK
ON/OFF
FAN
MODE
SWING
TIMER ON
TIMER OFF
ENERGY
SAVER
DISPLAY
(A/C)
SLEEP
low fan
high fan
med. fan
COOL
DRY
FAN
HEAT
(Only available to heat
pump models)
Summary of Contents for TWW22CFAGJBB
Page 21: ...21 www teco com au LBB PV1 ...
