TECO TECOMAT FOXTROT IB-1301, Basic Documentation

Page: 12 / 16

Basic documentation for IB-1301 module
Counter input parameters
Input frequency / resolution ability 5 kHz / 1 pulse
Pulse length min. 50 µs
Delay from log. 0 to log. 1 5 µs
Delay from log. 1 to log. 0 5 µs
Register range 32 bits
0 to 4 294 967 296
Incremental encoder input parameters
Frequency of symetric signal (V, G) 1,25 kHz
Pulse length (V, G, NI, MD) min. 50 µs
Delay from log. 0 to log. 1 5 µs
Delay from log. 1 to log. 0 5 µs
Register range 32 bits
0 to 4 294 967 296
Pulse length, period and phase shift measuring input parameters
Input frequency 0.1 to 5000 Hz
Pulse width 50 µs to 10 s
Absolute measuring error max. ±10 µs
3. PACKAGING, TRANSPORTATION, STORAGE
The module is packed according to internal packing instructions into a cardboard box. This
documentation is enclosed in the packaging. The external packaging is done according to the
quantity and way of transportation into a shipping container being labelled and containing all the
necessary data for transportation.
The goods is transported from the manufacture's facilities as agreed when placing an order.
Transportation of the goods by the customer must be pursued by covered transport means and
in the position as indicated on the packaging. The shipping containers must be fixed in such a
way to avoid accidental spontaneous movement and damage of the external container during
transport.
During transportation and storage, the product must be protected from direct influence of at-
mospheric actions. Transportation of the product is permitted within a temperature range of
-25 °C to 70 °C, relative humidity of 10 % to 95 % (without condensation) and minimum atmo-
spheric pressure higher than 70 kPa.
The product must be stored only in clean spaces free from conductive dust, aggressive
gases and vapours. The optimum storage temperature is 20 °C.
4. INSTALLATION
The basic module is installed to the vertical position at the U-bar Č SN EN 50022. Installation
of the module (basic module and eventually peripheral modules) shall be carried out according
to TXV 004 10.
TXV 113 01 12