Tecomat Foxtrot – system design
3/32
1.
Basic and communication modules FOXTROT
1.1.
Basic module CP-1004
The CP-1004 basic module is the smallest independent control system of the Foxtrot series.
Features
:
Power supply 24 VDC, input power max. 8W (refer to chapter 1.1.1)
DI0-7 - 8 binary inputs, without galvanic isolation:
DI0 ÷ DI3 optionally special functions (refer to chapter 1.1.2),
DI4 ÷ DI7 optionally analog inputs 0÷10V (positive input terminal AI0÷AI3)
DO0-5 - 6 relay outputs, galvanically isolated from the other circuits
ETH
- Ethernet 10/100 Mbit (standard RJ-45 connector), galvanically isolated from the other circuits
CH1
- Serial channel, fixed fitted with the RS232 interface, without galvanic isolation
CH2
- Serial channel, with possibility to be fitted with standard submodules (e.g. TC700 series).
The
terminal boards
of the basic module are standard cage-type fixed terminals with a spacing of 5.08
mm. To handle the terminal, a flat bladed screwdriver 3.5 mm wide can be used (a cross screwdriver can
be used, too).
Table 1.1.1
Terminal parameters for basic module CP-1004
Terminal spacing
5,08
Terminal type
Screw-type cage terminal
Length of stripped conductor
mm
7
Conductor dimensions
Fixing range
mm
2
0,08 ÷ 2,5
Wire
1)
mm
2
0,5 ÷ 2,5
Cable
2)
mm
2
0,5 ÷ 2,5
Cable with female header
3)
mm
2
0,5 ÷ 2,5
Cable with female header and plastic collar
4)
mm
2
0,5 ÷ 1,5
Nominal voltage
V
250
Nominal current
A
12
1)
Wire, e.g. harmonised type H05(07) V-U
2)
Cable, e.g. harmonised type H05(07) V-K
3)
Cable, with copper female header according to DIN 46228/1
4)
Cable with female header with plastic collar according to DIN 46228/4
Informative conversion table of cross-sections and conductor diameters
Conductor diameter
Metric
Nominal
cross-
section
Wire
Cable
AWG
mm
2
mm
mm
–
0,22
0,51
0,53
24
0,34
0,63
0,66
22
0,5
0,9
1,1
20
0,75
1,0
1,2
18
1,0
1,2
1,4
-
1,5
1,5
1,7
16
2,5
1,9
2,2
14
4,0
2,4
2,7
12