ENGLISH
User’s manual
32
UPS EVO DSP PLUS TM
Conformity to the European Directives
TECNOWARE S.r.l. confirms that EVO DSP PLUS TM models comply with the requirements set out in: the Low Voltage Directive
(Safety) 2006/95/EC and following amendments, the EMC (Electro-Magnetic Compatibility) Directive 2004/108/EC and
following amendments.
The following standards were applied:
Low Voltage Directive (Safety): EN62040-1-1: 2003
EMC Directive (Electro-Magnetic Compatibility): EN62040-2: 2006 category C3
WARNING -
This is a product for commercial and industrial application in the second environment - installation restrictions or
additional measures may be needed to prevent disturbances.
Product Disposal
EVO DSP PLUS TM models cannot be disposed as an urban waste, but must be treated as a separate
waste. Any violation is indictable with financial sanctions as per in force regulations.
An incorrect waste disposal or an improper use of the same or of any parts can be damaging for the
environment and for human health.
A correct waste disposal of products having the dustbin symbol marked by a cross help to avoid
negative consequences to the environment and to human health.
Lead Batteries
EVO DSP PLUS TM models contain lead acid, sealed, maintenance free batteries.
This kind of batteries, if handled by non-experienced personnel, can cause electric shock or short-
circuit.
For this reason the batteries can be removed only by qualified technical personnel, specialized and
authorized by Tecnoware. Tecnoware declines any responsibilities if this rule is not followed.
To remove the batteries, firstly you have to take off UPS cover, then remove all the metallic parts
that are blocking the batteries pack, disconnect batteries one to each other and take them off from
their housing one by one.
The batteries cannot be disposed as an urban waste, but must be treated in conformity with
2006/66/CE European Directive; any violation is indictable with financial sanctions as established into
2006/66/CE European Directive.