background image

 

24 MONTHS WARRANTY – valid in all UE countries  

TECNOWARE S.r.l. guarantees the product for a period of 24 months from the original date of 

purchase.  
The date of purchase is proved with the receipt of account released by the authorised reseller, 

which clearly indicates the date in which the product was sold and the product identification 

code (model and serial number). Upon request of Technical assistance, a copy of your receipt 

must be surrendered. 
This guarantee implies free reparation or free substitution of any products parts or components 

which result faulty due to defective manufacture.  In such case the transportation costs are 

covered by the guarantee service. 
In the event of irreparable fault, or should the same malfunction repeat itself, TECNOWARE 

S.r.l will provide the final decision on the product substitution. 
Any parts damaged due to the negligence or carelessness in using the product (such as failing 

to follow the correct operating instructions indicated in the user manual), violations, incorrect 

installation or maintenance operated by non authorized personnel, transportation damages, 

natural calamities, accidental causes, phenomenon not subordinated to the normal product 

functioning, non qualification of environment in which the product operates, and in any case: 

any circumstances in which one cannot date back to the  defective manufacture, will not be 

covered by the guarantee 
Compensation is excluded for: direct or in direct damages of any nature caused to people or 

objects, by the incorrect use of product; by the discontinuance of product functioning, or for 

stopping the usage due to the product servicing. 
This guarantee is valid upon the terms and conditions cited above, in all the countries belonging 

to the UE countries. 

 
 

 

CONFORMITY TO THE EUROPEAN DIRECTIVES 

 

TECNOWARE S.r.l. confirms that EVO models comply with the requirements set out in: the Low Voltage 

Directive (Safety) 73/23/EEC and following amendments, the EMC (Electro-Magnetic Compatibility) 

Directive 89/336/EEC and following amendments. 
The following standards were applied: 
Low Voltage Directive (Safety): EN62040-1-1: 2003 
EMC Directive (Electro-Magnetic Compatibility): IEC62040-2: 2001, IEC61000-3-2: 2001, IEC61000-3-3: 

2001, EN55022: 1998, IEC61000-6-4: 20011

 

 
 

PRODUCT DISPOSAL 

EVO cannot be disposed as an urban waste, but must be treated as a separate 

waste. Any violation is indictable with financial sanctions as per in force regulations.  
An incorrect waste disposal or an improper use of the same or of any parts can be 

damaging for the environment and for human health.    
A correct waste disposal of products having the dustbin symbol marked by a cross 

help to avoid negative consequences to the environment and  to human health. 

 

 

User’s manual 

21 UPS 

EVO

 

Summary of Contents for EVO 1.0

























Reviews: