EVO 304 BASE / EVO BLU BASE
Pag
. 14
29/16
brush (33) wrapped in a cloth, which will work as an “extractor” when fastened with the special
clamps. We suggest applying steam also while picking up the dirt. To get a good result, work with
surface areas not larger than 5sm at a time thus preventing dirt from drying and adhering on the floor
again.
We suggest that you use the brush without the cloth when the dirt to be removed is considerable
and when the dirt is not considerable, it is enough to work with the brush wrapped in a cloth.
When confronted with solid objects while cleaning the floor (i.e. chewing-gum) use the special scraper
(44) which can be attached to the steam lance (37) and is able to remove stubborn objects without
scratching the treated surface.
To remove wax from the floor use a cloth fastened to the rectangular brush (33). The steam helps
loosen the wax so that its removal will be easier. To spread the wax on the floor use as mentioned
above a clean cloth fastened onto the brush. Put the wax on the cloth, the heat of the steam will help
spread the wax evenly so that its penetration will be easier. When the wax is dry proceed with normal
polishing methods.
The power of steam substitutes any type of detergent.
WARNING
THE GENERATOR PRODUCES STEAM WITH A TEMPERATURE OVER 100°C. BEFORE
STARTING THE CLEANING TASK WE SUGGEST TO TRY ON A SMALL AREA TO AVOID
DAMAGES.
Marble and parquet floors
We suggest adding a steam buffer (47) to the rectangular brush (33) and then wrap it with a cotton
cloth to avoid scratching the surface. To continue the cleaning it is necessary to change the cloth
according to the quantity of dirt to be collected on the floor.
WARNING
THE STEAM SHOULD NOT BE IN DIRECT CONTACT WITH THIS KIND OF FLOOR FOR AN
EXTENDED PERIOD OF TIME! SUCH SURFACES MAY BE DAMAGED IN CASE OF
COMBINED USE OF EXCESSIVE HEAT, HUMIDITY AND BRISTLES. THEREFORE CARRY
OUT THE CLEANING TASK IN THE SHORTEST POSSIBLE TIME.
