TECNOVAP
CHATTANOOGA CARMEN
PAG. N. 10
8. BEFORE REFERRING TO TECHNICAL ASSISTANCE
PROBLEMS
POSSIBLE CAUSES
REMEDY
APPLIANCE DOES NOT PRODUCE
STEAM AND VACUUM DOES NOT
WORK.
LACK OF POWER.
MAKE SURE THE PLUG IS WELL
INSERTED (23) AND THE POWER SWITCH
OF THE HOUSE IS TURNED ON.
THE RED "LOW WATER" INDICATOR
(14) LIGHTS UP.
ALL THE WATER HAS BEEN CONSUMED.
REFILL THE BOILER (17) WITH CLEAN
WATER (MAX 3 LITERS).
SUCTION POWER IS MISSING.
A)
T H E
V A C U U M
T U B E
I S
OBSTRUCTED.
B)
THE VACUUM DRUM (5) IS FULL OF
WATER.
C)
LACK OF POWER TO THE VACUUM
CLEANER.
A)
CLEAN TUBE AND ACCESSORY
USED.
B)
EMPTY THE VACUUM DRUM (5).
THEN REFILL IT WITH APPROX. 1
LITER OF CLEAN WATER.
C)
MAKE SURE THE SWITCH (2) IS "ON"
AND THE PLUG (3) IS WELL
INSERTED.
WATER LEAKS THROUGH THE
C O N N E C T I O N S
O F
T H E
ACCESSORIES.
CHECK THE WEAR OF THE O-RING.
CLEAN AND LUBRICATE THE O-RING
WITH GREASE.
IF NECESSARY, REPLACE WITH ONE OF
THE SPARES SUPPLIED.
STEAM DOES NOT COME OUT.
A)
BOILER HAS NOT YET REACHED
THE OPERATIONAL PRESSURE
(GREEN LIGHT (12) IS STILL OFF).
B)
STEAM REGULATOR (16) IS OFF.
A)
W A I T
A
F E W
M I N U T E S .
B)
TURN THE STEAM REGULATOR (16)
ON (TO THE LEFT).
DROPS OF WATER COME OUT OF THE
ACCESSORIES.
AT BEGINNING OF WORK WATER
CONDENSES IN THE TUBES AND
A C C E S S O R I E S
D U E
T O
T H E
DIFFÉRENCE IN TEMPERATURE.
AFTER A FEW MINUTES OF USE THIS
PROBLEM WILL CEASE.
IF IT CONTINUES, PROCÉED TO THE
CLEANING OF THE BOILER.
A C C E S S O R I E S
D O
N O T
F I T
PERFECTLY.
THERE IS DIRT BUILD UP IN THE JOINTS
AND LOCK/RELEASE LATCHES (30).
CLEAN AND LUBRICATE THE JOINTS OF
THE ACCESSORIES.
9. CERTIFICATIONS AND HOMOLOGATIONS
CE
MACHINE MANUFACTURED ACCORDING TO THE EUROPEAN NORMS
EN 6335-2-3+A1+A52, EN 60335-2-79, EN 55014, EN 61000-3-2, EN 61000-3-3.
