PAGE 8
User Manual
- Ecomatic 2010
Operating mode diagnostics MIX-SALT 1 / MIX-SAND 1 / MIX-SALT 2 / MIX-SAND 2 / SALT / SAND
By simultaneously holding down the pushbuttons #4 Up and #6 Down it is possible to enter system diagnostic mode.
There are 6 diagnostic pages. Browse by pushing the pushbutton #14 Menu.
By simultaneously holding down both #4 Up and #6 Down pushbuttons, it is possible to quit diagnostic page and return to the main operating
page MIX-SALT 1.
ENGINE ALARMS
Engine alarm
Alternator alarm
Oil pressure alarm
Fuel empty alarm
0 = absent
1 = present
SPREADER ALARMS
Spreading mode alarms
Spinner raised alarm
No material alarm
No liquid alarm
0 = absent
1 = present
PROPORTIONAL CURRENTS
Proportional current values
on the following electro-valves:
Conveyor EV
Water pump EV
Spinner EV
Current values in mA
PUSHBUTTONS
Control box push-buttons
Push-button position
(released/pushed)
on the control box
0 = released
1= pushed
SIMMETRY SENSOR
Tail simmetry actuator stroke
Actuator stroke length for tail
simmetry
0% = minimum stroke
100% = maximum stroke
RPM of SPEED SENSORS
RPM of speed sensors
in hydraulic engines
RPM CONVEYOR
RPM WATER PUMP
RPM SPINNER
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 10
Operating mode diagnostics
MIX-SALT 1 / MIX-SAND 1 / MIX-SALT 2 / MIX-SAND 2 / SALT / SAND
By simultaneously holding down the pushbuttons #
4
Up and #
6
Down it is possible to enter system diagnostic mode.
There are 6 diagnostic pages. Browse by pushing the pushbutton #
14
Menu.
ENGINE ALARMS
Engine alarms
Alternator alarm
Oil pressure alarm
Fuel empty alarm
0 = absent
1 = present
SPREADER ALARMS
Spreading mode alarms
Spinner raised alarm
No material alarm
No liquid alarm
0 = absent
1 = present
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 11
PROPORTIONAL CURRENTS
Proportional current values on the following
electro-valves:
Conveyor EV
Water pump EV
Spinner EV
Current values in mA
PUSHBUTTONS
Control box push-buttons
Push-button position (released/pushed) on the
control box.
0 = Released 1= Pushed.
SIMMETRY SENSOR
Tail simmetry actuator stroke.
Actuator stroke length for tail simmetry.
0 % = minimum stroke.
100% = maximum stroke.
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 10
Operating mode diagnostics
MIX-SALT 1 / MIX-SAND 1 / MIX-SALT 2 / MIX-SAND 2 / SALT / SAND
By simultaneously holding down the pushbuttons #
4
Up and #
6
Down it is possible to enter system diagnostic mode.
There are 6 diagnostic pages. Browse by pushing the pushbutton #
14
Menu.
ENGINE ALARMS
Engine alarms
Alternator alarm
Oil pressure alarm
Fuel empty alarm
0 = absent
1 = present
SPREADER ALARMS
Spreading mode alarms
Spinner raised alarm
No material alarm
No liquid alarm
0 = absent
1 = present
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 11
PROPORTIONAL CURRENTS
Proportional current values on the following
electro-valves:
Conveyor EV
Water pump EV
Spinner EV
Current values in mA
PUSHBUTTONS
Control box push-buttons
Push-button position (released/pushed) on the
control box.
0 = Released 1= Pushed.
SIMMETRY SENSOR
Tail simmetry actuator stroke.
Actuator stroke length for tail simmetry.
0 % = minimum stroke.
100% = maximum stroke.
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 11
PROPORTIONAL CURRENTS
Proportional current values on the following
electro-valves:
Conveyor EV
Water pump EV
Spinner EV
Current values in mA
PUSHBUTTONS
Control box push-buttons
Push-button position (released/pushed) on the
control box.
0 = Released 1= Pushed.
SIMMETRY SENSOR
Tail simmetry actuator stroke.
Actuator stroke length for tail simmetry.
0 % = minimum stroke.
100% = maximum stroke.
User Manual
TECNORD
SERVOCOMANDI E REGOLAZIONE
ECOMATIC 2010 - User Manual 10-11_capitolo_A (generale) - tradotto1.1
Page 12
RPM of SPEED SENSORS.
RPM of speed sensors in hidraulic engines.
RPM CONVEYOR
RPM WATER PUMP
RPM SPINNER
By simultaneously holding down both #
4
Up and #
6
Down pushbuttons, it is possible to quit diagnostic page and return
to the main operating page MIX-SALT 1..
5.2 UPLOAD MODE
After selecting the UPLOAD unload mode, the paged showed below will be displayed:
A
Nominal flow of the conveyor proportional valve (expressed in %).
The value can be set between 0 and 100% (i.e. maximum flow) with potentiometer #
10
.
B
Nominal flow of the water pump proportional valve (expressed in %).
The value can be set between 0 and 100% with potentiometer #
11
.
In case of low water level, “---“ will be displayed instead of the percentage value and the warning light #
19
will blink.
This mode allows to unload the spreading material in a safe and simple way. Unload can be useful when it must be
changed the material type or at the end of the season in order to avoid material left in the tank.
If the unloading mode is not active, the pushbutton #
9
will activate the spreading mode and vice-versa. Unloading
mode activation is indicated by the “Spread On” warning light #
18
.
A
B
