- 15 -
Replacement of the oven light bulb
In order to avoid the possibility of an electric shock ensure that the appliance is
switched off before replacing the bulb.
o
Remove all oven shelves, the drip tray and the side rack
that is on the same side as the oven light.
o
Using a screwdriver, remove the lamp cover (1).
o
Unscrew the bulb (2) clockwise remove it from its holder
o
Replace the bulb with a 25W/300°C, screw type pigmy
o
Do not use any other type of bulb
o
Place the lamp cover back into position. There is a curve on
one side of the cover; this should be on the right hand side
as the cover goes back into place.
Do not use any other type of bulb.
Screw the bulb in, making sure it its properly inserted into the ceramic socket.
Screw in the lamp cover.
Door removal
The hinges (A) have two movable bolts on them (B).If you raise both of the
movable bolts (B),then the hinges (A) are
released from the oven housing. (As shown figure 1)
You should grip the sides of the door at the centre and
then incline it slightly towards the oven cavity and then
pull the door gently away from the oven cavity.
figure 1
IMPORTANT:
You should make sure that the door is supported at all times and
that you place the door on some padded material whilst cleaning it.
The oven door and door glass should only be cleaned using a damp cloth and a
small amount of detergent. The cloth MUST NOT have come into contact with any
form of cleaning product or chemical previously.
To refit the door you should slide the hinges back into their slots and open the
door fully.
IMPORTANT:
The movable bolts (B) must be closed back into their original
positions before closing the door.
A
B
