_ Electronic Ovens _ rev. 0 ________________________________________________________________ KF 981 EV _
_________________________________________________________________________________________ page 17 _
3.2.12
3.2.12
3.2.12
3.2.12 Start/stop push button
Start/stop push button
Start/stop push button
Start/stop push button
Once a programmed cooking cycle has been selected or a manual cycle set, press the push
button
to start cooking. The green led lights up and the beeper sounds to confirm the
cooking cycle has started. To interrupt the cycle the push button can be pressed at any time.
3.2.13
3.2.13
3.2.13
3.2.13 On/off push button
On/off push button
On/off push button
On/off push button
Press the push button
to turn the oven on and off. When the oven is off, the green led is
on and vice versa. When the oven is cooking, this push button is disconnected: to turn the oven
to turn the oven
to turn the oven
to turn the oven
off you must first stop the cookin
off you must first stop the cookin
off you must first stop the cookin
off you must first stop the cooking
g
g
g (pressing the START/STOP push button).
3.2.14
3.2.14
3.2.14
3.2.14 Light push button
Light push button
Light push button
Light push button
Press the push button
to light the cooking chamber. When the green led lights up it
confirms the light is on. The light turns off automatically after 60 seconds. If the push button is
kept pressed until the beeper sounds it confirms that the light will remain on. To turn the light
off press the push button again.
3.2.15
3.2.15
3.2.15
3.2.15 Cool cooking chamber push button
Cool cooking chamber push button
Cool cooking chamber push button
Cool cooking chamber push button
To rapidly cool the cooking chamber at the end of a cooking cycle, hold the door open and
press the push button
. When the green led lights up it confirms the function is activated.
During forced ventilation, the temperature in the cooking chamber is shown moment by
moment on the temperature display.
3.2.16
3.2.16
3.2.16
3.2.16 Self clean push button
Self clean push button
Self clean push button
Self clean push button
To begin washing the boiler, with the oven turned off
with the oven turned off
with the oven turned off
with the oven turned off (the OFF green led is alight), press the
push button
until the beeper sounds to confirm. When the green led is alight it confirms the
function is activated.
3.2.17
3.2.17
3.2.17
3.2.17
Clock + 1 push button
Clock + 1 push button
Clock + 1 push button
Clock + 1 push button
At the end of the cooking cycle the beeper sounds for 10 seconds and the figure “0000”
begins flashing on the display. While the figure is flashing, which lasts for 60 seconds, by
pressing the push button
the cooking time can be extended: each time the push button is
pressed the time is increased by one minute (the option is deactivated at the end of the cooking
cycle with the probe in the core). When the oven is turned OFF the time display shows the
current time: to change or enter the time (if it is missing) press the push button.
3.2.18
3.2.18
3.2.18
3.2.18
Enter or change current time
Enter or change current time
Enter or change current time
Enter or change current time
With the oven turned OFF, press the push button
and the two figures relative to the hour
begin flashing on the time display. Use the knob “1” to enter the current hour. The day of the
week is shown on the temperature display (1= 7 through to 7 = Sunday). Use knob no. “2” to
enter the current day. Press the push button
again and the two figures will start flashing on
the time display relative to the minutes. Use knob “1” to enter the current minutes. When the
push button is pressed again the time display shows the complete time.
3.2.19
3.2.19
3.2.19
3.2.19
Start clock push button
Start clock push button
Start clock push button
Start clock push button
With the oven turned ON or during the cooking cycle, when the push button is pressed at
any time, the current time can be checked on the time display (the other displays are
deactivated).
3.2.20
3.2.20
3.2.20
3.2.20 Programmed ignition
Programmed ignition
Programmed ignition
Programmed ignition
With the oven turned OFF, when the push button
is pressed, the parameters are shown that
have been entered for programmed ignition: the time (time display), the day (temperature
