GB
12
KYRY DSS
is a surgical aspirator power-fed at 230V ~ / 50Hz, to be used for suctioning body liquids (such as mucus, phlegm and
blood) provided with 4 antistatic wheels, two of which with braking device, and a pulling handle.
This equipment is designed for easy transport and continuous utilization.
Thanks to these characteristics and to its functions, this device is particularly suitable for utilization in hospital wards and operation
theatres both for suctioning body liquids and for gynaecological and dermatological (liposuction) applications.
Made of highly heat resistant, electrically insulated plastic material in conformity with the latest European
safety standard. Supplied with FLOVAC® 2000ml collection system, made up from a rigid re-usable polycarbonate container and a
disposable polyethylene collection bag and fitted with a suction regulator and a vacuum gauge on the front panel.
The electronic management system fitted on the front panel allows to perform suction by means of the footswitch control as well as
to suction liquids in both tanks provided without having to switch the equipment off to reconnect the second tank.
GENERAL WARNING
READ INSTRUCTION MANUAL CAREFULLY BEFORE USE
ONLY HIGHLY QUALIFIED STAFF USE RESERVED
THE INSTRUMENT MUST NOT BE DISASSEMBLED. ALWAYS CONTACT TECHNICAL SERVICE
KEEP OFF THE REACH OF CHILDREN OR NOT CAPABLE PEOPLE WITHOUT SUPERVISION
FULL CONTAINERS MUST BE HANDLED WITH GREAT CARE DURING TRANSFER TO THE DISPOSAL AREAS,
FOLLOWING THE LOCAL PROCEDURES AND REGULATIONS
IMPORTANT SAFETY RULES
1.
Check the condition of the unit before each use. The surface of the unit should carefully inspected for visual damage. Check the
mains cable and
do not connect to power
if damage is apparent
;
2.
Before connecting the appliance always check that the electric data indicated on the data label and the type of plug used,
correspond to those of the mains electricity to witch it’s to be connected;
3.
Respect the safety regulations indicated for electrical appliances and particularly:
Use original components and accessories provided by the manufacturer to guarantee the highest efficiency and safety of the
device;
Never immerge the appliance into water;
Position the device on stable and flat surfaces in a way that the air inlets on the back aren’t obstructed;
To avoid incidents, do not place the aspirator on unstable surfaces, which may cause it to accidentally fall and lead to a
malfunction and/or breakage. Should there be signs of damage to the plastic parts, which may expose inner parts of the
energised device,
do not connect the plug to the electrical socket.
Do not attempt to make the device work before it has
been thoroughly checked by qualified personnel and/or the CA-MI technical service department.
Don’t use in the presence of inflammable substances such as anaesthetic, oxygen or nitrous oxide;
Don’t touch the device with wet hands and always prevent the appliance coming into contact with liquids;
Don’t leave the appliance connected to the power supply socket when not in use;
Don’t pull the power supply cable to disconnect the plug remove the plug from the mains socket correctly;
Store and use the device in places protected against the weather and far from any sources of heat. After each use, it is
recommended to store the device in its own box away from dust and sunlight.
In general, it is inadvisable to use single or multiple adapters and/or extensions. Should their use be necessary, you must
use ones that are in compliance with safety regulations, however, taking care not to exceed the maximum power supply
tolerated, which is indicated on the adapters and extensions.
4.
For repairs, exclusively contact technical service and request the use of original spare parts.
Failure to comply with the above can jeopardise the safety of the device;
5.
Use only for the purpose intended.
Don’t use for anything other than the use defined by the manufacturer.
The manufacturer will not be responsible for damage due to improper use or connection to an electrical system not complying
with current regulation.
6.
Instrument and accessory discharging must be done according to current regulations in the country of use.
7.
WARNING
: Do not change this equipment without the permission of the manufacturer CA-MI Srl. None of electric or mechanical
parts have been designed to be repaired by customers or end-users. Don’t open the device, do not mishandle the electric /
mechanical parts. Always contact technical assistance
8.
Using the device in environmental conditions different than those indicated in this manual may harm seriously the safety and
the technical characteristics of the same;
9.
The medical device is in contact with the patient by means of a disposable probe (not supplied with the device). If this device
must be used with a specific suction probe, the end user is responsible for making sure it complies with the ISO 10993-1 rule;
10.
The product and its parts are biocompatible in accordance with the requirements of regulation EN 60601-1;
11.
Operation of the device is very simple and therefore no further explanations are required other than those indicated in the
following user manual.
12.
The medical device requires special precautions regarding electromagnetic compatibility and must be installed and used in
accordance with the information provided with the accompanying documents: the KYRI DSS device must be installed and used
away from mobile and portable RF communication devices (mobile phones, transceivers, etc.) that may interference with the
said device.
Summary of Contents for KYRI DSS
Page 1: ...I 1 ...
Page 48: ...48 ...
